OPTOKON

The LSH adapters are designed for connectors with PC and APC polishing method. LSH integrated protective cap protects ferrule from dust and rules out any laser light emissions, the single type is equipped with metal internal shutter. The LSH adapter is compatible with E2000TM connectors.

The LSH adapters are available with or without flange. The dimensions of single adapter is the same as SC type, the same standardized cut-outs will then be used for all adapters which are compatible with SC standard. 
 

The FC adapters are designed and manufactured according JIS, IEC, EIA/TIA and ANSI specifications for intermateability and optical performance. The FC adapters are offered in MM or SM performances, for connectors with PC and APC polishing method. It is possible to exactly specify your demands concerning keying slot width (standard Seiko Instruments or Seikoh Giken) for APC adapters, type of sleeve (phosphor bronze or zirconia) and adapter performance: various shape of flange, D-hole, DD-hole, etc.  

The SC adapters are designed and manufactured according  to JIS, IEC, EIA/TIA and ANSI specifications for intermateability and optical performance. The SC adapters are offered for MM or SM applications, designed for connectors with PC and APC polishing method. The ordering code allows exact specification of your demands concerning sleeve type (phosphor bronze or zirconia) and adapter variant, duplex version is also available.

In addition to the standard SC adaptesr a wide range of hybrid adapters is provided to enable interconnection between different connector types. The SC adapters can be equipped with protective shutter to eliminate dangerous laser emissions in high power optical systems.

The innovative LC design offers a SFF - small form factor one-half the size of current industry standards, and simple features create a new definition of user-friendliness. The LC meet EIA/TIA 568A, FOCIS 10 and IEC 11801 specifications for optical performance and intermateability. The LC Duplex fits into the SC standard cutout. Two different versions are available: 
- Duplex adapters
- Quadruple adapters

The ST adapters are offered in MM or SM performances, for connectors with PC polishing method. It is possible to exactly specify your demands of sleeve (polymer, phosphor bronze or zirconia) and adapter performance: metal or plastic.

The MU high density fiber optic interconnection system offers a new solution for high performance telecommunications networking. The MU adapter is at least half the size of the standard SC adapter. It can offer twice the port density, but all the optical  performance of traditional fiber optic connectors. The MU system includes a complete range of multimode and singlemode.

The MT-RJ connector type is designed to bring together the latest advances in precision molding and multi-fiber ferrule technology, providing the end user with an optical interface that is easier and more cost effective to install. At half the size of comparable duplex SC adapters, yet using the same space in patch panels and networking equipment as RJ-45 copper connectors, the MT-RJ adapters doubles the capacity of existing networking infrastructures.

The SMA adapters are specially designed for multimode data communication applications. SMA adapters are fully compatible with existing SMA hardware.

OPTOKON offers durable MTP adapters that provide quick connection for up to 24 optical fibers. The MTP adapter is suitable for connection of MTP/MPO multifiber connectors. Connection integrity is provided by adapter latches which are locked into place by a spring loaded sliding mechanism on the MTP/MPO connector plug. 
The MTP adapters are available in Standard Footprint and SC Footprint versions, according to requirement. Refer to fibers interconnection – two various positions of MTP connectors available:  Key up to key down (opposed) and  key up to key up (aligned, straight) available. This allows to maintain the right position of fibers in connection of two multifibers connectors. 

The DIN type adapters utilize an ultra high precision alignment sleeve with a nickel plated brass housing for superior performance and durability. The adapters are available with either ceramic split sleeves. Hybrid version DIN – FC adapter type is availble

- Simply strip and cleave your fiber and insert into the Bare Fiber Adapter
- Broken fibers are removed with piano wire allowing hundreds of insertions
- Accommodates 125 µm clad fiber with Insertion loss < 1 dB

The BFAF Adapter introduces new innovated series of Bare Fiber Adapters. It is designed to be used for temporarily connection of unterminated fibers to meet test, service and communications requirements. Adapters are available with FC and SC connectors.