OPTOKON

The PM-800N is a part of OPTOKON test equipment designed for thorough fiber line diagnostic. It is designed to measure absolute or relative optical power in optical networks. It can be used as a portable power meter or as a USB probe. The changeable adaptor design allows the simple exchange of optical connectors according to actual needs.

Automatic wavelength detection
Automatic wavelength detection (AWD) mode allows using OPTOKON Light source and Power meter without manually switching the measured wavelength and decreases the possibility of faulty measurement.

Cycle mode
Cycle mode allows the device to toggle between available wavelengths automatically.
The Li-Pol rechargeable battery ensures long-term working time with a minimum lifetime of 2 years. The unit can store measurement data which can be uploaded to a PC. The backlight function of the display facilitates the reading
of measured data in poor lighting conditions

The LS-800N is OPTOKON test equipment designed for thorough fiber line diagnostics. The light source is available in various wavelengths. The model with one or two outputs with two light sources on each port provides a maximum of 4 wavelengths in one device. The Light source is equipped FC output adaptor as standard. The changeable adaptor design allows the simple exchange of optical connectors according to actual needs. 

Automatic wavelength detection
The automatic wavelength detection (AWD) mode enables to use the OPTOKON Light Source and Power Meter without manually switching the measured wavelength and prevents faulty measurement. 

Cycle mode
The cycle mode allows the device to automatically toggle between available wavelengths.

The PM-4212 is a 4 port portable optical power meter. The small size does not prevent the optical power meter fulfilling the operational requirements of a full size tester. 
The power meter is designed for simultaneous measurement of up to 4 single mode or multimode fibers. All four input interfaces are fitted with 1mm InGaAs photo detectors, with changeable ADP adapters for a wide range of single mode and multimode fiber connectors.
The tester can be used as standalone power meter or as part of a testing workstation. Communication with control software is through the USB port or an Ethernet network.

The PM-4212-SI3 is a 4 port portable optical power meter. The small size does not prevent the optical power meter fulfilling the operational requirements of a full size tester. 
The power meter is designed for simultaneous measurement of up to 4 multimode fibers. All four input interfaces are fitted with 3.6 mm Si photo detectors, each with a 13 mm2 working area and with changeable TE-ASP adapters for a wide range of MM fiber connectors.
The tester can be used as standalone power meter or as part of a testing workstation. Communication with control software is through the USB port or an Ethernet network 

The PM-800-G is a members of OPTOKON test equipment family designed for thorough fiber optic line diagnostic. Both are designed to  measure absolute or relative optical power in optical networks. It can be used as portable power meter or as a USB probe. The changeable adaptor design allows the simple exchange of optical connectors according actual need. 

Automatic wavelength detection
Automatic wavelength detection (AWD) mode allows using OPTOKON Light source and Power meter without manually switching the measured wavelength and decreases the possibility of faulty measurement.