Fusion Splice Sleeves P-Series
OPTOKON offers the industry's highest quality fusion splice sleeves and holders. Standard sleeves are constructed with a stainless steel strength member, polyolefin copolymer inner tube and a polyolefin outer tube. Cut lengths are precise and all ends are free from burrs and sharp edges. Standard Sleeves are heat bonded to ensure tubes maintain perfect alignment during shipping, handling and shrinking. Sleeves are available in custom lengths, colors and diameters.
- Standard Sleeves meet Bellcore GR-1380
- Heat bonded assembly
- Outer tube meets MIL-I-23053/5 Class 2
- Choice of lengths
- Choice of diameters
Outer Tube - Polyolefin (meets MIL-I-23053/5 Class 2)
Working temperature |
-55 °C to 135 °C |
Water absorption minimum |
0.05% |
Min. shrink temperature |
95 °C |
Fungus resistance |
Inert |
Solvent resistance |
Good |
Acid resistance |
Excellent |
Inner Tube - Polyolefin Copolymer (Ethylene-Vinyl Acetate)
Melting point |
80 °C |
Strength Member
Single fiber sleeves |
302 Stainless Steel with Rounded and polished ends |
Ribbon fiber sleeves |
Ceramic/quartz |
Completed Shrink (per Bellcore GR-1 380-CORE)
Toxicity |
None |
Shrink time* |
Standard: 90 seconds, Mini/Micro: 30-50 seconds |
*Shrink time will vary with manufacturer of the heater used and the ambient temperature.
P-A-60 |
Standard Sleeve (3.0 mm after shrink) |
P-B-60 P-B-40 |
Slim Sleeve (2.5 mm after shrink) |
P-C-40 P-C-30 P-C-25 |
Mini Sleeve (2.0 mm after shrink) |
P-D-40 P-D-30 P-D-25 |
Micro Sleeve (1.6 mm after shrink) |