LS-800 – Light Source
The LS-800 is OPTOKON test equipment designed for thorough fiber line diagnostics. The light source is available in various wavelengths. The model with one or two outputs with two light sources on each port provides a maximum of 4 wavelengths in one device. The changeable adaptor design allows the simple exchange of optical connectors according to actual needs.
Automatic wavelength detection
The automatic wavelength detection (AWD) mode enables to use the OPTOKON Light Source and Power Meter without manually switching the measured wavelength and prevents faulty measurement.
Cycle mode
The cycle mode allows the device to automatically toggle between available wavelengths.
- TE-ALS-FC FC output adaptor
- TE-ALS-SC SC output adaptor
- TE-ALS-ST ST output Adaptor
- TE-HC-03 Hard carrying case
- Standalone up to 4 channel light source
- Modulation CW, 270 Hz, 1 kHz, 2 kHz
- Auto Wavelength Detection mode
- Changeable output adaptors
- Auto Off feature, Cycle mode
|
General specifications |
Value |
Unit |
Note |
|
Dimensions |
165 x 80 x 40 |
mm |
with TE-ASP-FC adapter |
|
Weight |
340 |
g |
with battery |
|
Operation temperature |
-10 to + 50 |
°C |
|
|
Storage temperature |
-40 to + 70 |
°C |
|
|
Humidity (non-condensing) |
0 to 95 |
% |
|
Light source specifications:
|
Code marking |
Wavelength [1] [nm] |
Output power [2] [dBm] |
Stability3 [dB] |
Note |
|
650 |
650 |
0 |
N/A |
Visible light |
|
850 |
850 |
0 |
± 0.03 dB |
Multimode fibers testing |
|
30 |
1300 |
0 |
± 0.05 dB |
|
|
31 |
1310 |
0 |
± 0.05 dB |
Single mode fibers testing |
|
49 |
1490 |
0 |
± 0.05 dB |
|
|
55 |
1550 |
0 |
± 0.05 dB |
|
|
62 |
1625 |
0 |
± 0.05 dB |
[1] Additional wavelengths are available on request
[2] Output power for dual wavelength port is 3 dB lower
Output adapters
|
|
|
|
 |
 |
|
TE-ALS-FC |
TE-ALS-SC |
TE-ALS-ST |
CASE TE-HC-03 | |
- Link Loss Characterization
- Fiber Detection
- Continuous fiber testing
- Visual fault locator
|
LS-800 |
- |
XX |
- |
XX |
- |
P1S1-P1S2/P2S1-P2S2 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P2 |
2.5/PC |
|
Adaptor |
|
P1S1 |
port 1, Wavelength 1 |
|
|
|
|
A2 |
2.5/APC |
|
ST |
P2 |
|
P1S2 |
port 1, Wavelength 2 |
|
|
|
|
|
|
SC |
P2,A2 |
|
P2S1 |
port 2, Wavelength 1 |
|
|
|
|
|
|
FC |
P2,A2 |
|
P2S2 |
port 2, Wavelength 2 |
|
|
|
|
|
|
NC |
Without adaptor |
|
Select code from transmitter |
|
|
|
|
|
|
|
LC |
Fixed adaptor LC/PC |
|
specifications table above |
|
|
|
|
|
|
|
NLC |
Fixed adaptor LC/APC |
|
|
|
Standard models:
|
LS-800-P2-FC-850-30/31-55 |
FC adaptor, Port1: 850 nm + 1300 nm laser, Port2: 1310 nm + 1550 nm laser |
|
LS-800-P2-FC-31 |
FC adaptor, port1: 1310 nm laser, |
|
LS-800-P2-SC-55 |
SC adaptor, Port1: 1550 nm leaser |
|
LS-800-P2-SC-850-30/31-55 |
SC adaptor, Port1: 850 nm Laser + 1300 nm leaser, Port2: 1310 nm + 1550 nm laser |
