PM-800 Optical Power Meter
The PM-800 is a part of OPTOKON test equipment designed for thorough fiber line diagnostic. It is designed to measure absolute or relative optical power in optical networks. It can be used as portable power meter or as a USB probe. The changeable adaptor design allows the simple exchange of optical connectors according actual need.
Automatic wavelength detection
Automatic wavelength detection (AWD) mode allows using OPTOKON Light source and Power meter without manually switching the measured wavelength and decreases the possibility of faulty measurement.
Cycle mode
Cycle mode allows the device to automatically toggle between available wavelengths.
- Power meter
- Universal 2.5 mm testing adaptor
- USB cable
- NiMH batteries
- Power charging adapter 220 V AC/5 V DC
- Calibration certificate
- Hard carrying case
- Smart Protocol PC software
- Data Exporter PC software
- Standalone Power meter
- InGaAs or Si photo detector
- CW, 270 Hz, 1 kHz, 2 kHz Modulation
- Auto Wavelength Detection(AWD) mode
- Changeable input adaptors
- Absolute and relative optical power measurement
- Cycle mode
- USB probe mode
- Two levels high capacity memory
|
General specifications |
Value |
Unit |
Note |
|
|
Dimensions |
165 x 80 x 40 |
mm |
With TE-ADP-250 adapter |
|
|
Weight |
340 |
g |
With battery |
|
|
Operation temperature |
-10 to + 50 |
°C |
|
|
|
Storage temperature |
-40 to + 70 |
°C |
|
|
|
Humidity (non-condensing) |
0 to 95 |
% |
|
|
|
Power Meter |
PM-800 |
PM-800SI |
Unit |
Note |
|
Detector |
InGaAs |
Si |
|
|
|
Detector size |
1 |
3.6 |
mm |
|
|
Wavelength range |
850 to 1625 |
650 to 850 |
nm |
|
|
Calibrated wavelengths |
850, 1300, 1310 |
650, 850 |
nm |
|
|
Dynamic range |
-65 to +101 |
-40 to + 10 |
dBm |
|
|
Uncertainty |
± 5 |
|
% |
1310, 1550 nm at -20dBm |
|
Resolution |
0.01 |
|
- |
|
|
Tone detection |
0.270, 1, 2 |
0.270, 1, 2 |
kHz |
|
|
Auto switching (AWD) |
Yes |
Yes |
- |
|
|
Data storage |
Up to 3000 |
Up to 3000 |
- |
Number of measurements |
|
AWD/Modulation Detection |
-50 / -45 |
- / -45 |
dBm |
1300 – 1625 nm / 850 nm |
|
Display units |
dBm, dB, W |
dBm, dB, W |
- |
|
- Link Loss testing
- Measurement of optical power
- Output power of transceivers
- Fiber Detection
- Continuous fiber testingv
- Signal detection
- USB probe
|
PM-800 |
Standard power meter with InGaAs photo detector, SM fiber |
|
PM-800SI |
Standard power meter with Si photo detector, MM fiber |
|
Accessories |
|
|
TE-ADP-FC |
FC output adaptor |
|
TE-ADP -LC |
LC output adaptor |
|
TE-ADP –SC |
SC output adaptor |
|
TE-ADP-250 |
2.5 mm universal adaptor |
|
TE-ADP-125 |
1.25 mm universal adaptor |
|
TE-HC-03 |
Rigid carrying case |
1) PM-800: Dynamic range for 850 nm is from -57 to +17 dBm
