OFT-4212 Fiber optic 4-channels optical testing system
The OFT-4212 introduces monitoring and testing system designed for long term measurement of time depending changes of optical power level. The system includes four input channels Power meter, Light source and reporting software – Optical Power Monitor. The system is available with 2 multimode 850/1300 nm or 4 single mode 1310/1490/1550/1625 nm working wavelengths.
The optical Power Meter is designed to measure absolute or relative optical power in four optical fibers at the same time. The OPM – Optical Power Monitor software allows monitoring of all four fibers at multiple wavelengths simultaneously. The measured data are recorded with TimeStamp which includes date and time of measurement. The results can be stored and easily exported into spreadsheets for Reports elaboration.
In addition the OFT-4212 is equipped with 650 nm visible light source for fiber visual check.
- Testing system with data recording SW – time dependency optical power measurement
- 4-fibers simultaneous measurements
- Multimode and Single mode application
- 650 nm – Visual Fiber Locator (VFL)
- Absolute and Relative optical power measurement
- Displayed units: dBm, dB, W
- Six working wavelengths measurement:
- 850, 1300, 1310, 1490, 1550, 1625 nm
- Data processing or downloading
- USB probe mode - full control via simple commands
Light Source
Output power |
Note: |
|
650 nm |
0 dBm |
typ. value |
850, 1300 nm |
-5 dBm |
typ. value |
1310, 1490, 1550, 1625 nm |
-5 dBm |
typ. value |
Stability (1 hour, delta/2): |
tested after 20 min warm up temperature 23 ± 1° |
|
850 nm, 1300 nm |
± 0.03 dB |
|
1310, 1490, 1550, 1625 nm |
± 0.05 dB |
|
Output port: |
FC/PC |
Other on demand |
Power meter
Photodetector |
4x 1 mm InGaAs |
Single mode |
Working wavelengths |
850, 1300, 1310, 1490, 1550, 1625 nm |
can be customized |
Dynamic range: |
-65 dBm to +10 dBm |
1300, 1310, 1490, 1550, 1625 nm |
Uncertainty |
± 5% |
1310, 1550 nm @ -20 dBm |
Resolution |
0.01 |
|
Input ports: |
Universal 2.5 mm |
Other on demand |
General specification
Dimensions |
450 x 280 x 138 mm |
Weight |
4.8 kg |
Power supply |
5 V DC |
Operation temperature |
-10 to + 50 °C |
Storage temperature |
-40 to + 70 °C |
OFT-4212-FC-31-49-55-62 |
TE-ADP-250 2.5 mm |
TE-ADP-125 1.25 mm |
Monitoring SW:
OPM – Optical Power Monitor
OPM – connection setup, parameter setting
OPM –data saving, Report elaboration
OFT-4212-FC-850-30 |
MM Loss test set, 850/1300 nm FC/PC adapter output port |
OFT-4212-FC-31-49-55-62 |
SM Loss test set, 1310/1490/1550/1625 nm, FC/PC adapter output |