OPTOKON, işletmeleri son derece uygun maliyet ve kolay data network ekipmanları serisinin kullanımını birleştirir. Geniş ürün gamını üstün değer, yüksek performans ve olağanüstü güvenilirlik sağlar. OPTOKON, şirketlerin fiyat performans oranlarını artırmasına ve sanallaştırılmış ortamlarda data yönetimini geliştirmesine yardımcı olur ve özel olarak tasarlanmış data network ürünleri üretir.
The OPTOKON transceivers are compliant with IEEE 802.3ae and the 10G MSA (Multi-Source Agreement). This upgrade, and reliability benefits by virtue of being hot-pluggable, also is designed for singlemode and multimode fiber with cost effective and high performance. The S10-D55, 1550 nm cooled EML laser based 10 Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length up to 100 km.
OPTOKON’s Copper Small Form Pluggable (SFP+) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T standards as specified in IEEE Std 802.3 . RJ-SP-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset.
The OPTOKON transceivers are compliant with IEEE 802.3ae and the SFP+ MSA. This upgrade, and reliability benefits by virtue of being hot-pluggable, also is designed for single-mode and multimode fiber with cost effective and high performance.
Products developed the SFP+ to SFP+ Active Optical cable to provide an affordable, high-performance, low power approaches when connecting point-to-point or rack-to-rack. The SFP+ to SFP+ Active optical cable provide data rates of up to 11.1 Gbps and at distances of up to 300 meters. AOC is electrically hot-pluggable compliant to SFF-8431 and RoHS.
Products developed the SFP+ to SFP+ copper patch cord to provide an affordable, high-performance, low power alternative to optical SFP+ approaches when connecting point-to-point or rack-to-rack. The SFP+ to SFP+ copper patch cords provide data rates of up to 10 Gbps and at distances of up to 7 meters. Short distance connections using optical cords can cost more than this copper solution.
The OPTOKON transceivers are compliant with SFF-8432. This upgrade, and reliability benefits by virtue of being hot- pluggable, also is designed for single-mode and multimode fiber with cost effective and high performance. 6.25 Gbps SFP+ can be used for CIPRI (2.456, 4.915, 6.144 Gbps), LTE (4.915, 6.144 Gbps) or OBSAI (6.144 Gbps) applications.
