QUICK-CURE Quick installable connectors -

Patchcords, Pigtails Fiber optic connectors

QUICK-CURE Quick installable connectors

QUICK-CURE^TM introduces a new type of optical connector for use in field conditions. The pre polished connector (SC, LC type) is designed for optical fiber termination especially in FTTH projects, directly in the end user site. Using the tool kit containing all necessary tools, it allows easy optical network installation. Termination with no epoxy, no heating, no polishing and no splicing achieves similar excellent transmission parameters as standard polishing and splicing technology.
Connector set for various fiber and cable diameter is available.

QUICK-CURETM helps you save time when working in the field.

FTTH project usable
Field installable, quick assembly time
Cost effective, User friendly
No electricity required No epoxy and polishing required
Precision mechanical alignment insures low insertion loss
Users proven, molded v-groove technologies

Fiber type	Single mode, G.652D & G.657A1 (typical/maximal)
Insertion Loss1	0.3 dB / 0.50 dB
Return Loss2	≥ 45 dB (UPC) / ≥ 60 dB (APC)
Polishing type	UPC / APC
Reusable	≥ 5 times
Fastening strength of bare fiber	≥ 5 N
Tensile strength	≥ 50 N
On-line tensile strength (20 N) ΔIL ≤ 0.3 dB	ΔIL≤ 0.3 dB
Mechanical durability (500 times)	ΔIL≤ 0.3 dB
Drop-off test (drop-off height 4 m, once per direction, totally 3 times)	ΔIL≤ 0.3 dB
Operational temperature	-30 °C to 75 °C
Connection method	Push – On

Note:
1) Installation by trained staff
2) APC ≥ 60 dB (room temperature), ≥ 35 dB (temperature -40 to +70 °C)

SC connector	LC connector

0.9/2.0/3.0 fiber-cable	0.9 fiber	3.0 cable

QUICK-CURETM tool kit content OSK-QCF-100:

Assembly manual
Tools and Consumables

Hard carrying case		Fiber cleaver OCL-100	Isopropyl alcohol	Kevlar cutter
Cable jacket stripper (3 mm, 2.4 mm)		Lint-free tissue	Marking pen	Universal Miller stripper (0.9 mm, 250 µm)