OPTOKON nabízí cenově efektivní a snadno použitelná zařízení a prvky pro moderní optické datové sítě. Široký sortiment našich produktů poskytuje vysoký výkon a mimořádnou spolehlivost. Produkty pro datové sítě jsou speciálně navržené tak, aby pomohly společnostem zlepšit poměr cena výkon a zlepšit správu dat ve virtualizovaných prostředích.
The OPTOKON transceivers are compliant with IEEE 802.3ae and the 10G MSA (Multi-Source Agreement). This upgrade, and reliability benefits by virtue of being hot-pluggable, also is designed for singlemode and multimode fiber with cost effective and high performance. The S10-D55, 1550 nm cooled EML laser based 10 Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length up to 100 km.
OPTOKON’s Copper Small Form Pluggable (SFP+) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T standards as specified in IEEE Std 802.3 . RJ-SP-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset.
The OPTOKON transceivers are compliant with IEEE 802.3ae and the SFP+ MSA. This upgrade, and reliability benefits by virtue of being hot-pluggable, also is designed for single-mode and multimode fiber with cost effective and high performance.
Products developed the SFP+ to SFP+ Active Optical cable to provide an affordable, high-performance, low power approaches when connecting point-to-point or rack-to-rack. The SFP+ to SFP+ Active optical cable provide data rates of up to 11.1 Gbps and at distances of up to 300 meters. AOC is electrically hot-pluggable compliant to SFF-8431 and RoHS.
Products developed the SFP+ to SFP+ copper patch cord to provide an affordable, high-performance, low power alternative to optical SFP+ approaches when connecting point-to-point or rack-to-rack. The SFP+ to SFP+ copper patch cords provide data rates of up to 10 Gbps and at distances of up to 7 meters. Short distance connections using optical cords can cost more than this copper solution.
The OPTOKON transceivers are compliant with SFF-8432. This upgrade, and reliability benefits by virtue of being hot- pluggable, also is designed for single-mode and multimode fiber with cost effective and high performance. 6.25 Gbps SFP+ can be used for CIPRI (2.456, 4.915, 6.144 Gbps), LTE (4.915, 6.144 Gbps) or OBSAI (6.144 Gbps) applications.
