Optical Distribution Frames and Cable Closures

Outdoor

MOTB-X20

MOTB-X20

The MOTB-X20 distribution box is designed to be used in distribution nodes of FTTH network, MDU
building cabinet for example. It allows termination of optical cable by splicing of pigtails, including
connection passive optical splitters 1:16 into passive fiber optic infrastructure. The ruggedized box is
designed for both indoor and outdoor applications.
The MOTB box includes a holder for SC type coupling adapters and splice cassette for heat
shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for 2 optical...

MOTB-X04

MOTB-X04

The MOTB-X04 small distribution box is designed to be used in distribution nodes of FTTH network, floor cabinet for example. It allows termination of optical cable by splicing of pigtails, including connection passive optical splitters 1:4 into passive fiber optic infrastructure. The ruggedized box is designed for both indoor and outdoor applications.  The MOTB box includes a holder for SC type coupling adapters and splice cassette for heat shrinkable or mechanical splice protection sleeves and holder for passive splitter. Provision for optical fiber cable to enter and 4 smaller...

Termination Box MOTB-X48A

Termination Box MOTB-X48A

Feature:

 Up to 48 drop cables
 Up to 54 simplex SC adapters
 Can accommodate up to 6 pieces 1 x 8, 1 x 16 and 1 x 32 PLC Splitter
 Maximum capacity is 144F (6 trays)
 The maximum capacity of splice trays is 24 fibers
 The oval port is for 1 loop cable or 2 cables with max Ø 20 mm.
 The reserved port is for cables with max Ø 18 mm
 The twelve ports with diameter Ø 14 mm, each port can hold 4 drop cables
 Bending radius > 30 mm
 Outdoor use IP...

CMS_01-08_EN-MOMB

CMS_01-08_EN-MOMB

The OPTOKON MOMB metal box is designed for optical fiber cables termination outdoors. It is an
IP66 design that resists moisture and dust entry. A single door box with lock is provided. Provision for
up to 4 optical fiber cables to enter or leave the enclosure through weatherproof cable glands is
provided. Four cable anchoring points are provided. The MOMB includes a set of individually
removable splice trays according to the customer request; each tray can accept 12 fusion splices. The
splice tray stack is secured by a long length hook and loop tie....